Galvanised Steel Street Lighting Columns
Our extensive range of street lighting columns is second to none, we literally manufacture every size and shape of lighting column available and these are briefly detailed below.
Stainton Metal was the first company in the UK to adopt galvanising as its standard corrosion protection system, the fact that this is now the industry norm stands as testament to this decision. The majority of the products we sell are manufactured from steel sheet or tube, which are then galvanised to BS EN 1461:1999.
Octagonal Lighting Columns - Thames
We manufacture octagonal (8 sided) tapering sheet steel lighting columns for mounting heights from 3.5 to 18m, these are available in planted root or flange plated versions along with a large variety of bracket arm options.
Conical Lighting Columns – Avon
At Stainton Metal we have 2 separate sets of taper tooling which allows us to design and manufacture a full range of tapered products. These tapering conical columns are available in mounting heights from 4m to 12m and are available with a wide range of bracket arms options. As per the octagonal column range they are available as planted root or flange plate options. Conical columns can be supplied with either an overlapping or flush fitting door which accentuates the smooth silhouette of this product range.
Stepped Tubular Columns – Metro
These columns are manufactured from 2 differing diameter tubes, with the base section being swaged and welded to the shaft. The design of the swaged joint is such that the shaft is supported internally by a heavy duty washer which is welded to both base and shaft sections to create a strong intermediary joint.
These columns are available in mounting heights from 3m to 18m and are again available with a full range of bracket arm options. As with our other ranges of lighting columns they are available in either a planted root or flangeplated versions and with either an overlapping or flush fitting door.
Base Compartments
Columns are normally supplied with a single or double access opening and fitted within the door compartment is an M8 Brass Earth Set and a non-hygroscopic backboard onto which the fuse cut out or control gear can be fitted.
Design
All these Lighting Columns are manufactured and designed in accordance with the British Standard BS 5649 and where appropriate comply with the Highways Agency Specification BD26/99.
These Lighting Columns will all fully comply with the new European Standard EN40, which will shortly replace BS5649.
|
